Posts Tagged ‘STP’

See my video on this very specific topology, what I’ve encountered, and the solution I found to work for me:


We know that for switches to cooperate inside each region the following must be configured the same:

  • Name – Case Sensitive
  • Revision – Any number, but should be the same
  • Instance mappings and their respective VLANs

Now, what about the VLANs themselves? What about switches and security? I looked all over for this answer and it was vague at best and each vendors documentation said something a little different from each others. However, this is just my preliminary testing, I added multiple instances to my spanning-tree setup on my Cisco Catalyst 3750. My scenario was as follows along with the outputs:

  1. Two instances
  2. Instance 1 had all the real VLANs that were actual VLANs on the switch
  3. Instance 2 had 2 VLANs mapped
    • The first test of MIST2 was with both VLANs not being defined on the switch
    • The second test of MIST2 was with one VLAN defined and the other not
    • The third test of MIST2 was with both the VLANs defined

Because MST instances themselves do not communicate the actual VLANs or VLAN mappings, and IST/CIST does not actually communicate the actual VLAN-to-Instance mapping either. Instead, we rely on IST0 to transmit the BPDUs that contain our information like: name, revision, checksum/Config digest/hash and the actual configuration digest/checkum/hash is the value to which each switch will calculate to determine if they’re operating in the exact same region or in different regions. The digest/hash/checksum is calculated based on parameters present in the MST configuration table. Want to know more about the hashing? Here is a link: 802.1s explained.

The information is long and boring, but do a search for “digest” and you’ll find yourself deep into figuring out how this all works. The test results are soon to come, I am working on both Catalyst and Nexus outputs to benefit not just enterprise and branch, but for those in the data center who’re having to work in vPC hybrid environments with STP attached devices. More to come…